Jun. 01, 2020
As a Mini Wheel Loader Manufacturer, share with you. Loader is a kind of
earthwork construction machinery widely used in highway, railway, construction,
hydropower, port, mine and other construction projects. It is mainly used for
shoveling bulk materials such as soil, sand, lime, coal, etc. , Hard soil, etc.
for light shoveling. Replacing different auxiliary working devices can also carry out bulldozing, lifting and other materials such as wood loading and
Wheel Loader China
In road construction, especially in the construction of high-grade highways, loaders are used for filling and excavation of subgrade projects, aggregate and loading of asphalt mixtures and cement concrete yards. In addition, it can carry out operations such as soil transportation, leveling the ground and traction of other machinery. Because the loader has the advantages of fast operation speed, high efficiency, good maneuverability, and easy operation, it has become one of the main types of earthwork construction in engineering construction.
Use and maintenance
Since construction machinery is a special vehicle, the operator should receive training and guidance from the manufacturer, fully understand the structure and performance of the machine, and obtain certain operation and maintenance experience before operating the machine. The "Product Operation and Maintenance Manual" provided by the manufacturer is necessary information for the operator to operate the equipment. Before operating the machine, be sure to read the "User Maintenance Manual" and carry out operation and maintenance as required.
Pay attention to the working load during the running-in period. Half of the working load during the running-in period should not exceed 60% of the rated working load, and a suitable workload should be arranged to prevent the the overheating site caused by the machine's continuous operation for a long time.
Pay attention to the indications of all the instruments frequently. If there is any abnormality, stop the vehicle in time to eliminate it. Stop the operation before the cause is found and the fault is not eliminated.
Pay attention to always check the level and quality of lubricating oil, hydraulic oil, coolant, brake fluid and fuel oil (water), and pay attention to check the tightness of the whole machine. During the inspection, it was found that there was too much oil and water, and the cause should be analyzed. At the same time, the lubrication of each lubrication point should be strengthened. It is recommended that the lubrication point should be filled with grease (except for special requirements) during each shift during the run-in period.
Keep the machine clean, and adjust and fasten loose parts in time to prevent the parts from wearing or loosening due to looseness.
At the end of the running-in period, the machine should be subjected to compulsory maintenance, check and adjustment work should be done, and pay attention to the replacement of oil. In short, the requirements for the use and maintenance of the loader during the running-in period can be summarized as: strengthen training, reduce load, pay attention to inspection, and strengthen lubrication. As long as we pay attention to and implement the maintenance and maintenance of the loader during the break-in period, it will reduce the occurrence of early failures, extend the service life, and improve the operating efficiency. The type machine does not bring you more benefits.
Our company also has Wheel Loader China for sale, please contact us.