What should I Pay Attention to when the Excavator Works on Soft Ground?

As an Excavator for Mining Manufacturer, share with you.

(1) If the bed is flat and the water flow is slow, the working depth in the water must be lower than the centerline of the supporting sprocket.

(2) When working on soft ground, the ground may fall little by little. Please pay attention to the condition of the lower body when working.

(3) When working on soft ground, please be careful not to exceed the depth of the machine groove.

(4) When the single-sided track shoe sinks into the mud, use a boom, stick or bucket to lift the track shoe, then pad the wood or logs, and then turn off the machine. If necessary, place the board under the bucket. When lifting the machine on the machine, the angle between the boom and the arm should be 90 ° -110 ° and the bottom of the bucket should always be in contact with the muddy ground.

(5) If you want to immerse the guide rails on both sides in muddy water, please place the plate according to the above instructions, slide the bucket off the ground (insert the bucket teeth into the ground), and then pull the bucket backward to pull out the excavator. Move it before pulling it out.

Large Hydraulic Excavator for Mining

How to solve the problem of abnormal rotation in Crawler Mining Excavator?

First of all, we first opened the mini-digger to an open space. The purpose is to make the excavator have a rotating space, then straighten the arm and the bucket is one meter above the ground. The engine stops and the residual pressure is released.

Second, someone pushed the bucket (the bucket left the ground) to move the excavator left and right. The person on the machine determines whether the abnormal sound comes from a rotating speed reducer or a rotating ring gear.

Third, still use the pump to push the rotating ring gear of the mini-digger or make an abnormal sound, turn off the engine before the disassembled tubing is closed, and after removing the rotating ring gear, bring the excavator back to the upper level of the removable mini-digger mechanism.

Fourth, after removing the rotating ring gear, send it to a professional bearing factory. After grinding the ball track by increasing the size of the ball, it is normal to reinstall the rotating ring gear into the hardening device of the mini-digger.

Our company also has Large Hydraulic Excavator for Mining for sale, please contact us.